Switching - Configuring VLAN?

To setup 2 switches with VLAN's 4 and 5 and link with a trunk in 802.1q mode, for example:

conf t 

vlan 4 name jim 

vlan 5 name claire 

int fa0/1 

switchport access vlan 4 

int fa0/2 

switchport access vlan 5 

int fa0/11 

switchport mode trunk 

switchport trunk encapsulation dot1q 

exit

On older IOS:

vlan database   vlan 4 name jim   vlan 5 name claire   exit

To view VLAN's use "sh vlan".
note: In the example above if Switch 1 is in VTP server mode and switch 2 in client mode, the VLAN information shoud be transmitted on the trunk and appear on switch 2.